关于我们 | 产品中心 | 行业应用 | 新闻动态 | 资料下载 | 联系我们
 


产品中心                
产品>驱动器>直流伺服驱动器>电机直接连接到I/O系统中>
KL2284
概要

KL2284输出端子以可选极性切换负载。这意味着直流电动机可以在两个旋转方向上使用。极性被切换为每通道两个输出位。联锁防止两个方向同时切换。先进的功率半导体以最小的尺寸实现安全无磨损的开关。KL2284的高启动电流和短路电流可与稳健的继电器相媲美。开关周期的数量几乎是无限的。

技术数据
Technical data KL2284
Connection technology 2-wire
Number of outputs 4 x H-bridge circuit
Nominal voltage 0…24 V AC/DC
Max. output current 2 A per channel
Breakdown voltage 80 V
Peak current 5 A (100 ms), < 50 A (10 ms)
Electrical isolation 500 V (K-bus/field potential)
Switching on speed typ. 235 ms, max. 300 ms
Switching off speed typ. 30 ms, max. 50 ms
On-resistance typ. 0.03 Ω
Current consumption K-bus 100 mA
Bit width in the process image 8 outputs
Weight approx. 50 g
Operating/storage temperature 0…+55°C/-25…+85°C
Relative humidity 95%, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals/markings CE
Housing data KL-12-8pin KS-12-8pin
Design form compact terminal housing with signal LEDs terminal housing with pluggable wiring level
Material polycarbonate
Dimensions (W x H x D) 12 mm x 100 mm x 68 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking labeling of the BZxxx series
Wiring solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-section s*: 0.08…2.5 mm², s*: 0.08…1.5 mm²,
st*: 0.08…2.5 mm², st*: 0.08…1.5 mm²,
f*: 0.14…1.5 mm² f*: 0.14…1.5 mm²
Connection cross-section AWG s*: AWG28…14, s*: AWG28…16,
st*: AWG28…14, st*: AWG28…16,
f*: AWG26…16 f*: AWG26…16
Stripping length 8…9 mm 9…10 mm
Current load power contacts Imax: 10 A
 
 
 

产品样本
   
   
   
   
   
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  北京润诚时代科技有限公司
电话:010-84450370
邮箱:runcheng_emd@sina.com
京ICP备09072358号-1