| 概要 |
KL2535输出端子通过电源电压的脉宽控制来控制输出电流。它和k总线是电隔离的。电流值(0到±1a)由自动化设备通过16位值指定。输出级有过载和短路保护。总线终端包含两个通道，通过发光二极管指示它们的信号状态。led通过显示典型的负载和接线故障来简化本地诊断。
|
| 技术数据 |
| Technical data |
KL2535 |
| Number of outputs |
2 |
| Nominal voltage |
24 V DC (-15%/+20%) |
| Load type |
inductive > 1 mH, valves, coils |
| Max. output current |
2 x ±1 A (short-circuit proof, thermal-overload proof for both channels together) |
| PWM clock frequency |
36 kHz |
| Duty factor |
0…100% (current-controlled) |
| Resolution |
max. 12 bit |
| Electrical isolation |
500 V (K-bus/field potential) |
| Current consumption power contacts |
load only |
| Current consumption K-bus |
typ. 60 mA |
| Bit width in the process image |
48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status |
| Configuration |
no address setting, configuration via Bus Coupler or controller |
| Weight |
approx. 55 g |
| Operating/storage temperature |
0…+55°C/-25…+85°C |
| Relative humidity |
95%, no condensation |
| Vibration/shock resistance |
conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission |
conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. |
IP20/see documentation |
| Pluggable wiring |
for all KSxxxx Bus Terminals |
| Approvals/markings |
CE |
|
| Housing data |
KL-12-8pin |
KS-12-8pin |
| Design form |
compact terminal housing with signal LEDs |
terminal housing with pluggable wiring level |
| Material |
polycarbonate |
| Dimensions (W x H x D) |
12 mm x 100 mm x 68 mm |
| Installation |
on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of |
double slot and key connection |
| Marking |
labeling of the BZxxx series |
| Wiring |
solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section |
s*: 0.08…2.5 mm², |
s*: 0.08…1.5 mm², |
| st*: 0.08…2.5 mm², |
st*: 0.08…1.5 mm², |
| f*: 0.14…1.5 mm² |
f*: 0.14…1.5 mm² |
| Connection cross-section AWG |
s*: AWG28…14, |
s*: AWG28…16, |
| st*: AWG28…14, |
st*: AWG28…16, |
| f*: AWG26…16 |
f*: AWG26…16 |
| Stripping length |
8…9 mm |
9…10 mm |
| Current load power contacts |
Imax: 10 A |
|
| |
| |
|
|
 |
|
 |
产品样本 |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
