关于我们 | 产品中心 | 行业应用 | 新闻动态 | 资料下载 | 联系我们
 


产品中心                
产品>驱动器>直流伺服驱动器>电机直接连接到I/O系统中>
KL2545
概要

KL2545输出端子通过电源电压的脉宽控制来控制输出电流。它和k总线是电隔离的。电流值(0至±3.5 A)由自动化设备通过16位值指定。输出级有过载和短路保护。总线终端包含两个通道,通过发光二极管指示它们的信号状态。led通过显示典型的负载和接线故障来简化本地诊断。

技术数据
Technical data KL2545
Number of outputs 2
Nominal voltage 8…50 V DC
Load type inductive > 1 mH, valves, coils
Max. output current 2 x ±3.5 A (short-circuit proof, thermal-overload proof for both channels together)
PWM clock frequency 36 kHz
Duty factor 0…100% (current-controlled)
Resolution max. 12 bit
Electrical isolation 500 V (K-bus/field potential)
Current consumption power contacts typ. 30 mA + load
Current consumption K-bus typ. 100 mA
Bit width in the process image 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status
Configuration no address setting, configuration via Bus Coupler or controller
Weight approx. 100 g
Operating/storage temperature 0…+55°C/-25…+85°C
Relative humidity 95%, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/see documentation
Pluggable wiring for all KSxxxx Bus Terminals
Approvals/markings CE
Housing data KL-24-2x8pin KS-24-2x8pin
Design form compact terminal housing with signal LEDs terminal housing with pluggable wiring level
Material polycarbonate
Dimensions (W x H x D) 24 mm x 100 mm x 68 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking labeling of the BZxxx series
Wiring solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-section s*: 0.08…2.5 mm², s*: 0.08…1.5 mm²,
st*: 0.08…2.5 mm², st*: 0.08…1.5 mm²,
f*: 0.14…1.5 mm² f*: 0.14…1.5 mm²
Connection cross-section AWG s*: AWG28…14, s*: AWG28…16,
st*: AWG28…14, st*: AWG28…16,
f*: AWG26…16 f*: AWG26…16
Stripping length 8…9 mm  
Current load power contacts Imax: 10 A
 
 

产品样本
   
   
   
   
   
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  北京润诚时代科技有限公司
电话:010-84450370
邮箱:runcheng_emd@sina.com
京ICP备09072358号-1