TS640/TS642自动换刀机床的无线工件测头

产品>测量与反馈>HEIDENHAIN>测头和视觉系统>

北京润诚时代科技有限公司
电话:010-84450370
邮箱:runcheng_emd@sina.com
京ICP备09072358号-1

概要

优异的探测精度，精度达±5 µm（使用T404标准测针）
优异的探测重复精度，极高测量质量：可达2 σ ≤ 1 µm
红外线信号传输
接口：HTL
防护等级：IP68

特征

红外线传输
这些测头可靠地传输红外线信号，减少在不易接近的机床内进行布线。红外线信号传输是紧凑型机床的理想选择。
电池寿命长
HEIDENHAIN工件测头提供智能待机功能，电池寿命长达约800小时，因此，无需频繁更换电池，进而缩短停机时间。换电池操作便捷，无需工具。
可选测针丰富
HEIDENHAIN提供丰富可选的测针，满足不同应用要求，其中包括不同的球头直径和测针长度。测针更换轻松简单：全部测针都配M3螺纹，可轻松固定在TS工件测头上。
长时间保持高精度
即使进行500万次探测后，HEIDENHAIN工件测头仍保持高精度：在3 m/min探测速度下，探测重复精度可达2 σ ≤ 1 µm，即使长时间使用，这些测头依然提供可靠的测量结果。

技术数据

Workpiece touch probe	Radio and infrared		Infrared
Workpiece touch probe	TS460	TS760	TS642
Probe accuracy	≤±5μm with use of the T404 standard stylus (at a probing speed of 1000mm/min)	≤±1μm with use of the T434 standard stylus (at a probing speed of 500mm/min)	≤±5μm with use of the T404 standard stylus (at a probing speed of 1000mm/min)
Probe repeatability Repeated probing from one direction	2α≤1μm Typical values: 2α≤0.5μm	2α≤0.25μm	2α≤1μm Typical values: 2α≤0.5μm
Probing force	Axial:≈7N Radial:≈1N	Axial:≈15N Radial:≈0.2N	Axial:≈7N Radial:≈1N
Deflection of probe contact	≤5mm in all directions (with stylus length L=40mm)
Deflection forces	Axial:≈8N Radial:≈1N
Probing speed (recommended)	≤3m/min	≤1m/min	≤3m/min
Collision protection	Optional	-	-
Protection EN 60529	IP68
Operating temperature	5°C to 54°C		10°C to 40°C
Storage temperature	-20°C to 70°C
Mass without taper shank	≈0.2kg		≈1.1kg
Fastening*	With taper shank Via M30x0.5 or M12x0.5 external thread		With taper shank Without taper shank (M30x0.5 connecting thread)
Signal transmission	Radio and infrared transmission (selectable) with 360° emission to the SE		Infrared transmission with 360° emission
Emission angle of the infrared signal	0°		0° or +30°
TS switch-on/off	Radio or infrared signal (selectable) from the SE		Via switch in the taper shank or infrared signal from the SE
Power supply	Two rechargeable or nonrechargeable batteries, 1 V to 4 V each; size 1/2 AA or size LR1		Two rechargeable or nonrechargeable batteries, 1 V to 4 V each; size C or size A
Operating time	Typically 90 h with alkaline batteries (included in delivery); typically 400 h possible with lithium batteries	Typically 65 h with alkaline batteries (included in delivery, see Power supply); typically 300 h possible with lithium batteries	Typically 400 h with alkaline batteries (included in delivery); typically 800 h possible with lithium batteries
Transceiver	• SE 661/SE 660 for radio and infrared transmission • SE 640 for infrared transmission • SE 540 for infrared transmission; for integration in the spindle head		SE 540, SE 640 or SE 660 (only infrared)
Interface	HTL or EnDat 2.2 via the SE		HTL



	产品样本