| Workpiece touch probe |
Radio and infrared |
Infrared |
| TS460 |
TS760 |
TS642 |
| Probe accuracy |
≤±5μm with use of the T404
standard stylus (at a probing
speed of 1000mm/min) |
≤±1μm with use of the T434
standard stylus (at a probing
speed of 500mm/min) |
≤±5μm with use of the T404
standard stylus (at a probing
speed of 1000mm/min) |
Probe repeatability
Repeated probing from
one direction |
2α≤1μm
Typical values: 2α≤0.5μm |
2α≤0.25μm |
2α≤1μm
Typical values: 2α≤0.5μm |
| Probing force |
Axial:≈7N
Radial:≈1N |
Axial:≈15N
Radial:≈0.2N |
Axial:≈7N
Radial:≈1N |
Deflection of probe
contact |
≤5mm in all directions (with stylus length L=40mm) |
| Deflection forces |
Axial:≈8N
Radial:≈1N |
Probing speed
(recommended) |
≤3m/min |
≤1m/min |
≤3m/min |
| Collision protection |
Optional |
- |
- |
| Protection EN 60529 |
IP68 |
| Operating temperature |
5°C to 54°C |
10°C to 40°C |
| Storage temperature |
-20°C to 70°C |
| Mass without taper shank |
≈0.2kg |
≈1.1kg |
| Fastening* |
With taper shank
Via M30x0.5 or M12x0.5 external thread |
With taper shank
Without taper shank (M30x0.5
connecting thread) |
| Signal transmission |
Radio and infrared transmission (selectable) with 360° emission
to the SE |
Infrared transmission with 360°
emission |
Emission angle of the
infrared signal |
0° |
0° or +30° |
| TS switch-on/off |
Radio or infrared signal (selectable) from the SE |
Via switch in the taper shank or
infrared signal from the SE |
| Power supply |
Two rechargeable or nonrechargeable batteries, 1 V to 4 V each;
size 1/2 AA or size LR1 |
Two rechargeable or
nonrechargeable batteries,
1 V to 4 V each; size C or size A |
| Operating time |
Typically 90 h with alkaline
batteries (included in delivery);
typically 400 h possible with
lithium batteries |
Typically 65 h with alkaline
batteries (included in delivery,
see Power supply);
typically 300 h possible with
lithium batteries |
Typically 400 h with alkaline
batteries (included in delivery);
typically 800 h possible with
lithium batteries |
| Transceiver |
• SE 661/SE 660 for radio and infrared transmission
• SE 640 for infrared transmission
• SE 540 for infrared transmission; for integration in the spindle head |
SE 540, SE 640 or SE 660 (only
infrared) |
| Interface |
HTL or EnDat 2.2 via the SE |
HTL |
